Simple terahertz receiver makes 6G mobile networks affordable

September 08, 2020 //By Christoph Hammerschmidt
Simple terahertz receiver makes 6G mobile networks affordable
Future mobile phone networks of the sixth generation (6G) will consist of many small radio cells. To connect them wirelessly, frequencies in the terahertz range (THz) are an obvious choice. Researchers at the Karlsruhe Institute of Technology (KIT) have developed a novel concept for simple and cost-effective terahertz receivers consisting of a single diode and combining it with a special signal processing method. In the experiment, a data transmission rate of 115 Gbit/s on a carrier frequency of 0.3THz can thus be achieved over a distance of 110 meters.

While the roll-out of 5G networks is in full swing, scientists are already thinking about the next generation of mobile communications. This, the sixth generation, once again promises significantly higher data transmission rates, shorter delay times and a greater density of terminals. It will also integrate artificial intelligence, for example to coordinate devices in the Internet of Things or autonomous vehicles. "In order to serve as many users as possible at the same time and to transmit as much data as possible as fast as possible, the wireless networks of the future will have to consist of numerous small radio cells," explains Professor Christian Koos, who is researching 6G technologies at KIT together with his colleague Professor Sebastian Randel. In these radio cells, the distances are short so that large data rates can be transmitted with minimum energy consumption and low electromagnetic immission. They require only small base stations that can be attached to streetlamps, for example.

To connect the individual cells, high-performance broadband radio links are needed, which in extreme cases must be able to transmit several hundred gigabits per second. Frequencies in the terahertz range are ideal for this purpose. However, the corresponding receivers are still comparatively complex and correspondingly expensive; in addition, they often represent the bottleneck for the attainable bandwidth. Researchers at the Karlsruhe Institute of Technology together with the diode manufacturer Virginia Diodes (VDI) in Charlottesville/USA, have now designed a simple and inexpensive receiver for terahertz signals that can be manufactured at low cost; their work has been presented in the journal Nature Photonics. The KIT team has achieved the highest data rate to date with wireless THz-transmission over more than 100 meters.


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.