Sustainable LEDs created from food, beverage waste

Sustainable LEDs created from food, beverage waste

Researchers at the University of Utah (Salt Lake City, UT) have discovered a way to create LEDs from food and beverage waste - a development that could potentially reduce harmful waste from LEDs generally made from toxic elements.
By eeNews Europe


LEDs can be produced by quantum dots (QDs) made with numerous materials, some of which are rare and expensive to synthesize, and even potentially harmful to dispose of. Some research over the past 10 years has focused on using carbon dots (CDs) – or simply QDs made of carbon – to create LEDs instead.

Compared to other types of quantum dots, CDs have lower toxicity and better biocompatibility, meaning they can be used in a broader variety of applications. Over the past year and a half U Metallurgical Engineering Research Assistant Professor Prashant Sarswat and Professor Michael Free have turned food waste such as discarded pieces of tortilla into CDs, and subsequently, LEDs.

To synthesize waste into CDs, Sarswat and Free employed a solvothermal synthesis, in which the waste was placed into a solvent under pressure and high temperature until CDs were formed. In this experiment, the researchers used soft drinks and pieces of bread and tortilla.

The food and beverage waste were each placed in a solvent and heated both directly and indirectly for anywhere from 30 to 90 minutes. After finding traces of CDs from the synthesis, Sarswat and Free proceeded to illuminate the CDs to monitor their formation and color.

The researchers also employed four other tests: Fourier transform infrared spectroscopy, x-ray photoelectron spectroscopy, and Raman and AFM imaging to determine the CDs’ various optical and material properties.

"Synthesizing and characterizing CDs derived from waste is a very challenging task. We essentially have to determine the size of dots which are only 20 nanometers or smaller in diameter, so we have to run multiple tests to be sure CDs are present and to determine what optical properties they possess," said Sarswat.

The various tests Sarswat and Free ran first measured the size of the CDs, which correlates with the intensity of the dots’ color and brightness. The tests then determined which carbon source produced the best CDs. For example, sucrose and D-fructose dissolved in soft drinks were found to be the most effective sources for production of CDs.

Finally, the CDs were suspended in epoxy resins, heated and hardened to solidify the CDs for practical use in LEDs.

Currently, one of the most common sources of QDs is cadmium selenide, a compound comprised of a two toxic elements. The ability to create QDs in the form of CDs from food and beverage waste would eliminate the need for concern over toxic waste, as the food and beverages themselves are not toxic.

"QDs derived from food and beverage waste are not based on common toxic elements such as cadmium and selenium, which makes their processing and disposal more environmentally friendly than it is for most other QDs. In addition, the use of food and beverage waste as the starting material for QDs allows for reduced waste and cost to produce a useful material," said Free.

In addition to being toxic when broken down, cadmium selenide is also expensive – one website listed a price of $529 for 25 ml of the compound.

"With food and beverage waste that are already there, our starting material is much less expensive. In fact, it’s essentially free," said Sarswat.

According to a report from the US Department of Agriculture, roughly 31% of food produced in 2014 was not available for human consumption. To be able to use this waste for creating LEDs which are widely used in a number of technologies would be an environmentally sustainable approach.

For more, see the results published in the journal Physical Chemistry Chemical Physics: Light emitting diodes based on carbon dots derived from food, beverage, and combustion wastes.

Related articles:
Quantum dots: eco-friendly version wanted
Quantum LEDs stick to the skin
Sub-5nm fab to manufacture quantum dot camera sensors